Removing of tree stumps involves several methods that are done such as digging out, shredding with a grinder and burning. By using the shredding process there are other equipment’s’ that can be used hand in hand with the grinder such as shovel, mattock, chainsaw and a rake. The shovel or mattock are used to clear the rocks around the stump. After which the chainsaw gets into action and cuts as much of the tree stump as possible. Leveling of the tree stump is done by cutting as much as possible. Get more info on emergency tree removal Lilburn. The tree stump removal is by use of a grinder which completely removes the tree stump.
A stump grinder is a power tool or equipment attachment that removes tree stumps by means of rotating cutting disc that chips away the wood. A stump cutter is also the same as a stump grinder. The size of stump grinders are either as large as trucks or medium sized as a lawn mower. Stumps are grinded by the high speed disk of stump grinders while also the roots made into small chips.
An arborist or landscaper that is qualified is known to perform stump grinding. Incorporation of a cutter wheel with fixed carbide teeth is common with most stump grinders. By raising or lowering the stump, a cutter is used in which its movements are controlled by hydraulic cylinders.
In terms of differences stump removal is more challenging and time consuming. Ways in which tree stump removal is challenging and time consuming is by removing the roots along with the stump. Root balls are known to grow four to ten times the size of the trunk and are well rooted to the ground making it harder and tiresome to remove from the ground. Not much work is required in stump grinding as it only involves taking the grinder and grinding the stump to a pulp.
After grinding the stump to a pulp the small pieces of the stump are used to cover the ground ensuring there is no hole. Get more info on tree services Lilburn. Landscapers or arborist charge stump removal depending on the size of the stump. Stump grinding has several ways in which it can be done.
So as to spare the damage of teeth of the cutting wheel then rocks are removed around the base of the stump using a shovel or mattock. Trimming of the stump close to the ground by a chainsaw is not a necessary step but speeds up the process. The grinder wheel is raised a few inches above the stump by use of a hydraulic lever. The wheel of the machine is directly positioned over the stump’s front edge. By slowly swinging the wheel from side to side the wood is cleared.